FRITZ!App WLAN

With FRITZ!App WLAN you can keep an eye on your wireless network at all times. Use the FRITZ!App WLAN for an easy connection from your Android smartphone or tablet to the wireless LAN of your FRITZ!Box or any other WLAN router. The FRITZ!App WLAN also provides you with useful details about the existing wireless connection. A graphic diagram presented in the FRITZ!App WLAN offers you additional transparency about the channel assignments of the various devices in your wireless LAN environment.

Since August 2018, Google's technical guidelines allow Android apps to display information on the wireless environment only if "location" rights have been enabled for the app. AVM has no influence on these Android guidelines.

If you do not wish to grant location rights and your device has an Android version older than Android 9 (Pie) installed, you can use the FRITZ!App WLAN Basic instead. The FRITZ!App WLAN Basic does not require location rights, as it is based on the state of the software before August 2018.

Minimum prerequisite:

- smartphone or tablet with Android version 4 or higher (App Version 2.0)

- smartphone or tablet with Android version 2.3 or higher (App version 1.2.1)

Many thanks for all the encouragement and five star ratings! We are overwhelmed and extremely motivated!

*Information about the WiFi throughput test: the performance and hardware of your android device can have an impact on the result. During the measurement your wireless LAN can be slowed down.

Information about the user rights required for this app:

• Near Field Communication: is used to control wireless connections via NFC/Android Beam

• Device ID: The device ID is used to store the password securely in each individual device.

• Call information: Along with the Device ID, the call information belong to a group predefined by Google. This call information is not used by the app.

• Microphone: The microphone and the camera belong into a group predefined by Google. This microphone function is not used by the the app.

• Access to the camera: necessary for reading the QR code

• Vibration: Haptic feedback to confirm that the QR code has been read

• Camera flash: May also be needed to read the QR code

• Wake lock: For switching the screen timeout on and off

• Change or delete contents of USB storage/SD card: For the sharing function information is cached locally before sending

• Test access to protected memory: Check for write rights on USB storage/SD card for sharing function

• Change network connectivity: Establish and clear wireless LAN connections

• Change system settings: Save sorting sequence of radio networks

• Location: Due to restrictions of Android 6.0 access to location is mandatory to display your surrounding wifi network information

• Call up wireless LAN connections: Check whether WLAN is switched on/off

• Call up network connections: Check status of wireless LAN connections

• Access to all networks: Query of the FRITZ!Box firmware/model number

使用FRITZ！App WLAN，您可以随时关注无线网络。使用FRITZ！App WLAN轻松连接Android智能手机或平板电脑，FRITZ！Box或任何其他WLAN路由器的无线局域网。 FRITZ！App WLAN还为您提供有关现有无线连接的有用详细信息。 FRITZ！App WLAN中提供的图表为您提供有关无线LAN环境中各种设备的通道分配的更多透明度。

自2018年8月起，Google的技术指南允许Android应用仅在为应用启用“位置”权限时才显示有关无线环境的信息。 AVM对这些Android指南没有影响。

如果您不希望授予位置权限，并且您的设备安装了早于Android 9（Pie）的Android版本，则可以使用FRITZ！App WLAN Basic。 FRITZ！App WLAN Basic不需要位置权限，因为它基于2018年8月之前的软件状态。

最低先决条件：

- Android 4或更高版本的智能手机或平板电脑（App Version 2.0）

- Android 2.3或更高版本的智能手机或平板电脑（App版本1.2.1）

非常感谢所有的鼓励和五星评级！我们不堪重负，极具动力！

*有关WiFi吞吐量测试的信息：Android设备的性能和硬件可能会对结果产生影响。在测量过程中，您的无线局域网可能会变慢。

有关此应用程序所需的用户权限的信息：

•近场通信：用于通过NFC / Android Beam控制无线连接

•设备ID：设备ID用于在每个设备中安全地存储密码。

•呼叫信息：与设备ID一起，呼叫信息属于Google预定义的组。应用程序不使用此呼叫信息。

•麦克风：麦克风和相机属于Google预定义的组。应用程序不使用此麦克风功能。

•访问摄像头：读取QR码所必需的

•振动：触觉反馈以确认已读取QR码

•相机闪光：可能还需要阅读QR码

•唤醒锁定：用于打开和关闭屏幕超时

•更改或删除USB存储器/ SD卡的内容：对于共享功能，信息在发送前在本地缓存

•测试对受保护存储器的访问：检查USB存储器/ SD卡上的写入权限以进行共享功能

•更改网络连接：建立并清除无线LAN连接

•更改系统设置：保存无线电网络的排序顺序

•位置：由于Android 6.0的限制，必须访问位置才能显示您周围的wifi网络信息

•调用无线局域网连接：检查WLAN是否已打开/关闭

•调用网络连接：检查无线LAN连接的状态

•访问所有网络：查询FRITZ！Box固件/型号